REFRIGERANT GAS EURO R-32

Euro Refrigerant R-32, chemically known as Difluoromethane (CH₂F₂), is a next-generation hydrofluorocarbon (HFC) refrigerant that has become the preferred choice for many modern residential and commercial air conditioning systems. It was introduced as a replacement for R-410A due to its lower Global Warming Potential (GWP) and higher energy efficiency.

With a GWP of ~675 (about one-third of R-410A) and zero ozone depletion potential (ODP = 0), R-32 aligns with international environmental regulations such as the Kigali Amendment and the EU F-Gas directive. It is now widely adopted in split ACs, VRF systems, and heat pumps across the globe.

R-32 offers excellent thermodynamic performance, including higher cooling capacity per unit volume, lower charge requirements, and better heat transfer properties compared to older HFC blends. This makes it highly energy efficient while also reducing the total refrigerant charge required in systems.

One consideration is that R-32 is classified as ASHRAE A2L (mildly flammable). While this requires careful system design and servicing practices, major manufacturers have engineered equipment specifically to safely utilize R-32 refrigerant.

Overall, Euro R-32 represents the balance between performance, environmental responsibility, and cost-effectiveness, making it one of the most popular modern refrigerants in the HVAC industry.

Key Features

• Low Environmental Impact – GWP ~675 (much lower than R-410A), ODP = 0.

• High Energy Efficiency – superior heat transfer and lower charge volume.

• Excellent Thermodynamic Properties – higher cooling capacity per kilogram.

• Reduced Refrigerant Charge – requires up to 20% less refrigerant compared to R-410A.

• Global Adoption – used extensively in split ACs and heat pumps worldwide.

• Mildly Flammable (A2L Classification) – requires safety considerations during handling.

Applications

• Residential split air conditioners.

• Commercial and office air conditioning.

• Variable Refrigerant Flow (VRF) systems.

• Heat pumps and reversible HVAC units.

• Chillers and modern refrigeration systems (in some regions).

Usage Guidelines

• Handle with Care – classified as A2L (mildly flammable); use only in systems designed for R-32.

• Use Proper Equipment – recovery machines, cylinders, and tools must be R-32 compatible.

• Avoid Moisture Contamination – always ensure system is dry before charging.

• Charge as Liquid or Gas – follow manufacturer’s guidance; liquid charging is common.

• Environmental Compliance – while lower GWP than R-410A, it is still an HFC subject to phasedown schedules.

FAQs

Q1: Why is R-32 better than R-410A?
A: R-32 has a much lower GWP (675 vs ~2,088 for R-410A), requires less refrigerant, and offers higher energy efficiency.

Q2: Is R-32 safe to use?
A: Yes, when used in systems specifically designed for it. It is mildly flammable (A2L), but with proper design, installation, and servicing, it is safe.

Q3: Can I retrofit my old R-410A system with R-32?
A: No. R-32 should only be used in systems designed and certified for it. Retrofitting R-410A systems is not recommended due to differences in operating pressures and safety standards.

Q4: What lubricants are compatible with R-32?
A: Only POE (Polyolester) oils are suitable for use with R-32 refrigerant.